QuickLabel Plexo! 653 - Manual (Page 95)

Service Functions
Plexo! 453 / Plexo! 653 User Guide 83
You can save the printer configuration to a CompactFlash memory card with the Save
settings function. The configuration will be saved as XML file in the folder \MISC of
the CF card. The current date is used as file name YYYYMMDD.XML (e.g.
20060802.XML for a file saved on 08-02-2006).
1 Insert CompactFlash card.
2 Press the menu button.
3 Select Service > Save settings menu.
4 If the function Save settings is protected via a PIN, use the arrow buttons to enter
the code number and confirm with the Enter button.
Saving of the configuration data starts. OK is shown in the display when the entire
saving procedure is complete.
5 Press the Enter button.
6 Do not remove the memory card until the saving procedure is complete.
An error message appearing during the saving procedure may be caused by an
unreadable CF card (e.g. unknown card type, unformatted card).
See “Format Card”
on page 93.
Load settings
Note: Access only possible with CF memory card inserted.
You can load a printer configuration previously saved to a CF card into the printer with
the Load settings function.
1
Insert CompactFlash card.
2 Press the menu button.
3 Select Service > Load settings menu.
4 If the function Load settings is protected via a PIN, use the arrow buttons to enter
the code number and confirm with the Enter button.
5 If several configuration files are found on the memory card, select the desired file
with the up and down buttons.
6 Press the Enter button.
Loading of the configuration data starts. OK is shown in the display when the
entire loading procedure is complete.
7 Press the Enter button.
8 Do not remove the memory card until the loading procedure is complete.
If an error occurs during the loading procedure, an error message appears in the
display. Restart the loading procedure in this case. If an error occurs again, you
must enter the configuration parameters via the operating panel.