Mounting – QuickLabel Plexo! 653 User Manual
Page 69
Accessories
Plexo! 453 / Plexo! 653 User Guide
57
Mounting
•
Prepare the installation point for the external operating panel as shown in the
drilling template. Dimensions are in millimeters.
•
Fix the external operating panel with 2 screws (DIN7984-M4x10). Dimensions are
in millimeters.
•
Connect the delivered cable at the 9-pin SUB-D plug of the panel and at one of the
USB interfaces (6) of the printer. The connection may be made while the printer is
switched on.
Directly after plug-in the external operating panel is ready.
This manual is related to the following products: