QuickLabel Plexo! 653 - Manual (Page 44)

Configuration
32 Plexo! 453 / Plexo! 653 User Guide
System messages tab
Status and error messages can be sent automatically to the SNMP manager or via
e-mail to the selected addresses immediately after they occur via the Ethernet interface.
You can select the messages to be sent and the destination addresses on the “System
messages” tab.
SNMP Data exchange between printer
and management station via
SNMP (Simple Network Manage-
ment Protocol). To activate:
• Set parameter to "On".
• Enter IP address of the
management station(s) (receiver
1 or receiver 2).
• Assign the "Community"
parameter the value "public".
Off
Time server Synchronization of the date and
time of the printer. To activate:
• Set parameter to "On".
• Enter IP address of the time
server.
Synchronization occurs hourly. The
accepted time is not automatically
saved in the printer, however. To
save the accepted time:
• Call up the parameter time and
save the displayed setting with
OK.
Off
Anonymous FTP Enables or disables a FTP-logon
with as "Anonymous". Off
Parameter Meaning Default