QuickLabel Plexo! 653 User Manual
Page 113
Fault Correction
Plexo! 453 / Plexo! 653 User Guide
101
Structural err.
Error in the file list of the
memory card, data access
is uncertain.
Format memory card.
Unknown card
Card not formatted. Type
of card not supported
Format card, use differ-
ent type of card.
USB error Device
stalled
A USB device has been
detected, but it is not
working.
Do not use the USB
device.
USB error Too much
current
The USB device con-
sumes too much current.
Do not use the USB
device.
USB error Unknown
device
Failure to detect USB
device
Do not use the USB
device.
Voltage error
Hardware error
Switch the printer off and
then on.
If error recurs call service.
It is shown which voltage
has failed. Please note.
Write error
Hardware error
Repeat the write process,
reformat card.
Write protected
PC card write protection
is activated.
Deactivate the write pro-
tection.
Wrong revision
Error when updating the
firmware. Firmware not
compatible with the
hardware version
Load the compatible
firmware.
Error message
Cause
Remedy