Setup tab, Set the parameters, Configuration parameter settings – QuickLabel Plexo! 653 User Manual
Page 42
Configuration
30
Plexo! 453 / Plexo! 653 User Guide
Setup tab
On the “Setup” tab, you can set all the configuration parameters which are also
accessible via the operating panel in the Setup menu. In addition, other parameters for
the Ethernet interface can be set (see below).
The menus and parameters are arranged in a tree structure in the top section of the tab.
The tree structure can be expanded in different ways:
•
Click circular symbol in front of the menu symbol once. The corresponding menu
is expanded.
•
Double-click menu symbol or menu name. The corresponding menu is expanded.
•
Click the Expand All button. The tree structure is fully expanded.
To change a parameter:
1
Locate parameter in the tree structure.
2
Click parameter name or the symbol next to it.
3
Enter value of the parameter in the input field in the bottom section of the tab.
4
Click Set.
5
Enter PIN and click OK.
The printer can be given a name on the top line of the tree structure. This name does
not have a functional meaning. Its sole purpose is to allow the operator to more easily
differentiate between the printers on a network.