QuickLabel Plexo! 653 - Manual (Page 53)

Plexo! 453 / Plexo! 653 User Guide 41
6
Loading Material
For adjustments and simple installation work, use the accompanying Allen key located
in the print unit. No other tools are required for the work described here.
Loading Labels from Roll
Positioning the Label Roll on the Roll Retainer
1) Turn knob (5) clockwise to release the roll retainer (4).
2) Remove the margin stop (6) from the roll retainer.
3) Load label roll (2) on the roll retainer (4) in such a way, that the labels are visible
from above after unrolling.
4) Slide the roll against the wall plate (1).
5) Guide the latches (7) of the margin stop (6) into the grooves (3) of the roll retainer
(4) and push the roll retainer against the label roll (2).
6) Turn knob (5) counterclockwise to tighten the label roll and the margin stop on the
roll retainer.