QuickLabel Plexo! 653 - Manual (Page 36)

Configuration
24 Plexo! 453 / Plexo! 653 User Guide
RS-422/485 Configuration of the optional serial
RS-422 or RS-485 interface. See
documentation of the serial inter-
face.
If interface is not installed, this
option is not available
Ethernet Configuration parameters of the Ethernet interface card.
You can access additional configuration parameters for the Ethernet inter-
face card via the printer website.
See “Setup tab” on page 30.
> DHCP Method of issuing IP address
On: Dynamic issuing of IP address
by the DHCP server
Off: Direct issuing of the IP address
by the operator
On
> IP IP address of the label printer. Only
valid with DHCP = Off.
> Mask Subnet mask (classification and
address range) of the local net-
work. Only valid with DHCP = Off.
> Gateway Connection address between the
local network and other networks.
The IP address of the computer
(router) on the network through
which the connection can be estab-
lished is used for this. The address
of the router can also be issued via
DHCP. Off
> Network error Printer switches to Error mode
when problems with the network
connection occur. Off
Keyboard Setting of the keyboard layout
when using an external keyboard.
If keyboard is not connected, this
option is not available.
Parameter Meaning Default