QuickLabel Plexo! 653 - Manual (Page 45)

Configuration
Plexo! 453 / Plexo! 653 User Guide 33
Note: The settings are not accepted until the Transfer button is clicked. If you switch to
another tab beforehand, the settings are lost.
Column Meaning
Description Status and error messages that can be sent.
• Expand tree structure by clicking the circular
symbol once or double-clicking the description.
An entry for a higher-order description (e.g. note) is
automatically accepted for all subordinate descrip-
tions (e.g. “Start”, “Not ready”, “Ribbon running
out”).
SNMP 1
SNMP 2
Management stations on local network which commu-
nicate with the printer via SNMP. To make use of
SNMP functionality, the SNMP agent must be acti-
vated.
• Select management station by clicking the
corresponding cell.
The selection is indicated via a symbol. You can undo
the selection by clicking it again.
E-mail Valid e-mail address for the SMTP server to which the
message is to be sent.
• Click cell and enter e-mail address or select from
pull-down menu.
Sound Audible signal which indicates receipt of the message.
• Click cell and select signal type in pull-down menu.