Wlan-card, Function, Mounting – QuickLabel Plexo! 653 User Manual
Page 66: Function mounting
Accessories
54
Plexo! 453 / Plexo! 653 User Guide
Other special characters
Example
WLAN-Card
Function
The WLAN-card 802.11 b/g allows to link a printer to a wireless network which
contains a Wireless Access Point. The ad-hoc mode for direct connection between
several end devices is not supported.
Note: When using the WLAN-card the printer port for the wired Ethernet connection is
disabled!
Mounting
Slide the WLAN-card considering the correct orientation of the two-rail guide into the
PC Card slot until it stops.
Note: The function Test > WiFi status allows to print a list (4) of the accessible Wireless Access
Points. For the printout material must be loaded which extends across the entire printing width.
Entering the character: ñ
1st entry: [~]
2. entry: [Alt] + [n]