QuickLabel Plexo! 653 - Manual (Page 90)

Test Functions
78 Plexo! 453 / Plexo! 653 User Guide
Example: In the following two figures, the printout in ASCII Dump mode is contrasted
with the "normal" printout of a label.
Test grid
The Test grid function prints out the geometric pattern on a background grid. This
allows you to assess the evenness of the print quality.
The printout occurs using the heat level and print speed specified in the Setup > Print
param. menu.
Note: The printout occurs without taking the label gaps into consideration. This is why endless
media are most suitable for this purpose.
1 Insert printable medium (labels, endless paper) which extends across the entire
printing width.
2 If the printout is to occur using thermal transfer printing, insert transfer ribbon
with the maximum width.
3 Press the menu button.
4 Select Test > Test grid menu.
5 Start printout with the Enter button.
The geometric pattern is printed every 5 seconds once the Test grid function is
started. During the pauses between the printouts the printer can be adjusted.