QuickLabel Plexo! 653 - Manual (Page 102)

Memory cards
90 Plexo! 453 / Plexo! 653 User Guide
• Formatting in the printer via the Format card menu item
• Formatting in the printer via the interface with the Mf;name CR command
Directory Structure
On CompactFlash cards some folders are created during formatting.
On USB flash drives connected to the printer, the same directory structure is
automatically generated when uploading files to the flash drive :
Note: PC cards have no folders!
Writing
The memory medium can be written to in several ways. The most functionally secure
way is writing to the card in the printer via a data interface.
Note: The card in the primary card slot is written to by default. You can write to a card in
another slot if you specify the path name of the slot in the file name.
Example: With direct programming, the command sequence for saving a label (file
ABC) has the following form:
Ms LBL; ABC Command for saving the file ABC
J |
H 100,0,T |
S l1;0,0,68,71,104 | Contents of the file ABC
T 10,10,0,3,pt15;memory card |
A 1[NOPRINT] |
Ms LBL End of save command
• After transfer of the command sequence, the file ABC is saved with the commands
from J to A.
• Only one label is printed each time the file ABC is called up.
• The [NOPRINT] parameter in command A suppresses the printing of a label when
the file is saved.
Folder name Contents
fonts Font files
images Graphic files
labels Label description files
misc Firmware, PPP, Setup and TMP files