Memory media functions in the offline menu, Label from card – QuickLabel Plexo! 653 User Manual
Page 103
Memory cards
Plexo! 453 / Plexo! 653 User Guide
91
•
To print the label a variable number of times, put command A after the ending Ms
command.
Memory Media Functions in the Offline Menu
Accessing the Memory card menu is only possible if a memory card is installed.
You can still only operate the card slot set in the menu Interfaces > Default card slot via
the operating panel. When operating via an interface, each card slot can be addressed
via a path.
Label from Card
Labels whose descriptions are saved on the memory medium can be printed using the
Label from card function.
1
Select the Label from card function in the Memory card menu.
2
Press the Enter button.
The name of the label found at the top of the index of the memory medium is
displayed.
3
Select the desired label in the index of the medium with the arrow buttons.
4
Press the Enter button.
If a label is selected which was saved with a fixed label quantity, the print job is
started immediately.
For label descriptions with a variable label quantity, a request to enter the label
quantity is displayed.
If additional input on the label description is required, the display requests to enter
the variable data.
5
Enter the label quantity/variable data with the following buttons:
•
Left arrow - cursor left
•
Right arrow - cursor right
•
Up arrow - increase value at cursor position by 1 or select next letter in
alphabet
•
Down arrow - decrease value at cursor position by 1 or select previous letter
in alphabet
6
Press the Enter button briefly to confirm the input and start the print job.
Canceling input: Press and hold the Enter button at least 2 seconds.