QuickLabel Plexo! 653 - Manual (Page 30)

Configuration
18 Plexo! 453 / Plexo! 653 User Guide
Machine Parameters
1) Press the menu button.
2) Select Setup > Machine param.
Set time Setting the system time in the
HH:MM:SS format. When chang-
ing the time, ensure that the Time-
zone, Daylight saving and Set date
parameters are set correctly.
The time can also be synchronized
automatically via the internet
using the Ethernet interface. The
print output of the time occurs in
the format set via the “Country”
parameter.
You can also change the time via
software. The change is not saved
permanently, however.
-
Parameter Meaning Default
Parameter Meaning Default
Printhead pos. X Shifting of the entire print image
perpendicular to the direction of
paper flow.
The absolute shifting of the print
image perpendicular to the direc-
tion of paper flow is limited to the
difference between the label width
and the printhead width set in the
software.
You can also set the Printhead pos.
X via software. The offset values
from the Machine param. menu
and the software are added
together.
0.0 mm