QuickLabel Plexo! 653 - Manual (Page 57)

Loading Material
Plexo! 453 / Plexo! 653 User Guide 45
9) Turn lever (1) clockwise to close the printhead.
Setting the Feed Path of the Transfer Ribbon
Transfer ribbon wrinkling can lead to print image errors. Transfer ribbon deflection
can be adjusted so as to prevent wrinkles.
Note: A maladjustment of the head locking system may also cause ribbon wrinkling. Check
first the setting of the head locking systems.
See “Loading Labels from Roll” on page 41.
Note: The adjustment is best carried out during printing.
1) Read current setting on the scale (1) and record if necessary.
2) Turn screw (2) with Allen key and observe the behavior of the ribbon. In the +
direction, the inner edge of the ribbon is tightened, and the outer edge is tightened
in the - direction.