QuickLabel Plexo! 653 - Manual (Page 107)

Plexo! 453 / Plexo! 653 User Guide 95
15
Fault Correction
Types of Errors
The diagnostic system indicates on the screen if an error has occurred. The printer is
set into one of the three possible error states according to the type of error.
Attention: State "Correctable error" : The labels, which are printed by the lower printer but
not yet printed by the upper printhead when the error occurs, cannot be repeated by the printer.
So the amount of the printed label will be reduced within the print job.
• If necessary print more labels in a new job.
If the print job contains counters, after pressing the pause key the print job would be
resumed with erroneous counter values.
• Quit the print job with the cancel key.
• Start a new print job with adapted counter values.
State Display Key Remark
Correctable error pause flashes
cancel lights
See “Key Func-
tions” on page 14.
Irrecoverable
error cancel flashes
Critical fault