QuickLabel Plexo! 653 - Manual (Page 43)

Configuration
Plexo! 453 / Plexo! 653 User Guide 31
Note: Information is not updated automatically while the “Setup” tab is open. Updating
occurs when the tab is changed or by clicking the Update button.
The following parameters for the Ethernet interface can only be accessed via the printer
website:
Parameter Meaning Default
SMTP server E-mails can be sent to selected
addresses when certain status and
error messages are generated. To
activate:
• Set parameter to “On”.
• Enter IP address of the SMTP
server.
• Enter a valid e-mail address for
the printer in the "From address"
field.
More detailed information on
sending e-mails is found in the Sys-
tem messages tab.
See “System mes-
sages tab” on page 32.
Off
Raw-IP port Service for printing on the net-
work.
Select a predefined port address.
9100
LPD Activation of the network printing
service LPD.
• Set parameter to "On".
• Typically activate the queue
name "lp". Several print spoolers
work without queue name.
Off
LPD queue name Activation of the LPD queue name lp
SOAP Activation of the protocol SOAP
(Simple Object Access Protocol) Off
SOAP password Password setting for SOAP Off