QuickLabel Plexo! 653 - Manual (Page 118)

Media
106 Plexo! 453 / Plexo! 653 User Guide
Reflex Mark Dimensions
Dim. Designation
Dim. in
mm
A Label distance > 2
L Width of reflex mark > 5
M Height of reflex mark 3 - 10
X Distance virtual label front edge - actual label front
edge
• Adjust software settings
0 up to A /
recomm. :
0
• Reflex marks must be on the back side of the material (liner).
• Label sensor for reflex marks on the top side on request.
• Specification is valid for black marks.
• Recognition of colored marks may fail. Preliminary tests are needed.