K-Patents PR-23 - Manual (Page 41)

5 Startup and use 33
number of the languages in the language menu varies depending on what languages
are loaded into the DTR. Language change through this menu is immediate.
5.3 Viewing system information
The DESCRIPTION selection from the Main menu (Figure 5.2) opens a path to complete
information about the system and calibration. This path is risk-free in the sense that
no values can be changed through this menu. To be able to make changes,
CALIBRATION
must be selected from the main menu.
The Description menu (Figure 5.5) leads to the following information:
1. SYSTEM : See Figure 5.5, right side.
2. mA OUTPUTS : See Section 6.5.1, “Configuring mA outputs”
3. RELAYS : See Section 6.3, “Configuring relays”.
4. SWITCHES : See Section 6.4, “Configuring input switches”.
5. PRISM WASH : See Sections 6.3 and 6.7, “Configuring prism wash”.
6. PARAMETERS : See Section 6.6, “Calibrating the concentration measurement”.
7. NETWORK : The Ethernet address and card ID of the DTR. See Section 12, “Ethernet
connection specification”.
Figure 5.5 System description