K-Patents PR-23 - Manual (Page 128)

120 PR-23 instruction manual
9.8.8 PR-23-M/MS mounting specifics
K-Patents Teflon body refractometer PR-23-M/MS is connected to the process by a
G1/2" female or a 1/2" NPT process connection, Figure 9.28 below.
Important: Always install PR-23-M/MS with sensor support to prevent the sensor
weight from pulling at the non-metallic piping. See Figure 9.28 for support placement.
Note! Keep sensor
axle horizontal
Note!
Cable downwards
Figure 9.28 G1/2" female process connection (mm [in])