K-Patents PR-23 - Manual (Page 40)

32 PR-23 instruction manual
Figure 5.3 Display setup menu
Main display format: As you can see in Figure 5.1, there are four different Main dis-
play formats: the dual sensor format shows information on both sensors while the
three different single sensor formats show selected information on one sensor at a
time. Choose
1 MAIN DISPLAY FORMAT in the Display setup menu to change the Main display.
The current format is shown on the display format selection display, see Figure 5.4 be-
low.
Figure 5.4 Main display format selection.
Note: An automatic 60 s (in verification 5 min) timeout will make backsteps from
any display until the Main display is reached.
Display appearance: The 2 DISPLAY BACKLIGHT & CONTRAST can be selected from the Display
setup menu (Figure 5.3). The values can be changed by using the arrow soft keys or
alternatively a one digit input, for example 8 designates 80 % when adjusting contrast.
The 3 DISPLAY INVERSION contains two choices. The default setting of the display is 1 POS-
ITIVE DISPLAY , i.e. yellow background and black text. However, in some environments
the display may be clearer if 2 NEGATIVE DISPLAY , i.e. black background and yellow text, is
chosen.
Bar graph settings: The command 4 BAR GRAPH allows you to set the bar graph span
and zero separately for sensors A and B.
Note:
Bar graph is only visible when Main display is in the bar graph format, see
above.
Display language: The command 5 DISPLAY LANGUAGE lets you choose the DTR display
language from the existing display languages, i.e. the languages that are loaded into
the DTR. The default language is English and it is always available. The order and