K-Patents PR-01-S - Manual

INSTRUCTION MANUAL
FOR PROCESS REFRACTOMETER
PR-01-S (-AX/FM/CS)
WARNING
The process medium may be hot or otherwise hazardous.
Precautions when removing the sensor from the process line:
Make positively sure that the process line is not under pressure (except with the isolation/retraction valve).
For a retractor/isolation valve the line pressure should be within the specifications.
For a prism wash system, close a hand valve for the wash medium and disable the power supply.
Loosen the clamp or flange bolts cautiously, be prepared to tighten them again.
Use shields and protective clothing adequate for the process medium.
Do not rely on avoidance of contact with the process medium.
After removal of the sensor, it may be necessary to mount a blind flange for security reasons.
Document/Revision No. INM 1/14 Effective: May 15, 2009
This Product Manual is delivered to end-user with K-Patents Product. Information in this manual is subject to change without notice.
The latest manual version is freely available at http//www.kpatents.com/. You can also contact [email protected].
THE PASSWORD FOR PR-01-S IS 7 8 4 5 1 2 IN PROGRAM VERSIONS 4.0 AND HIGHER.
K-PATENTS OY
Postal address:
P.O. Box 77
FI-01511 Vantaa, Finland
Tel. + 358 207 291 570
Fax +358 207 291 577
[email protected]
http://www.kpatents.com/
K-PATENTS OY
Street address:
Elannontie 5
FI-01510 Vantaa, Finland
K-PATENTS, INC.
1804 Centre Point Circle,
Suite 106,
Naperville, IL 60563
Tel. 630-955 1545
Fax 630-955 1585
[email protected]
http://www.kpatents.com/
Protected by one or more of
the following U.S. patents:
Patent No. 4571075
Patent No. 5,563,737
Patent No. 5,009,113
Patent No. 5,617,201
Patent No. 5309288
Protected by one or more of
the following U.S. patents:
Patent No. 4,571,075
Patent No. 5,563,737
Patent No. 5,009,113
Patent No. 5,617,201
Patent No. 5,309,288
Patent No. 6,067,151