Guralp Systems CMG-DCM build <10,000 - Manual (Page 45)

Acquisition Modules and Platinum Firmware Platinum Overview
/var/lib/config­backup and automatically saved configuration backups
can be found in /var/lib/config­backup.auto.
4.4.4 Uploading a saved configuration
Backups that have been saved to a PC can be restored to any acquisition
module – not just the one from which it was originally downloaded. This
provides a useful mechanism for maintaining a centralised configuration
library.
To upload a previously stored configuration backup, click the
button. Your operating system's standard file selection dialogue will open.
Navigate to the required file and select it, then click the
button.
The uploaded configuration will then appear in the list of saved backups and
can be restored, if required, as described in the following section.
Saved configurations can also be uploaded using file transfer tools like scp
and sftp. They should be copied to /var/lib/config­backup.
4.4.5 Restoring a configuration
The same screen in the web interface is also used for restoring a
configuration. Simply select the required saved configuration from the list of
saved backups and click on the
button.
The following screen will be displayed:
The date and time at which the backup was saved is shown; in the example
above, this is the 12th of April, 2013 at 11:43. The file name and description
of the backup are also given.
The “Restore network settings” check-box allows you to choose whether or
not to restore the network configuration or not. You should select this if, for
MAN-EAM-0003 45 Issue E - February 2014