Guralp Systems CMG-DCM build <10,000 User Manual
Page 210
Acquisition Modules and Platinum Firmware
Building Networks
•
Remote service/port: The default is 1566 but, if you have configured a
different port on the GDI link client, you should enter the same port
here.
•
Enable at startup: Controls whether the service is enabled at start-up.
•
Channel filtering: The drop down has three options: No filtering, By
sample rate or By channel names.
•
Max sample rate: Enter the maximum sample rate you with to receive
from the client
•
Channel name: Enter the channels names for the data streams you wish
to receive.
Clicking the
button on any row will open a new row. In the same way,
rows can be deleted by clicking the corresponding
button.
13.1.2.2 Configurable parameters in expert mode
The following additional configuration parameters are available by clicking
the “Expert” button at the bottom of the form and selecting the 'Advanced' tab.
Log file: It may sometimes be desirable, for debugging purposes, to separate
log messages for this transmitter from the standard system log. The text field
can be populated with a path name which will then be used for dedicated
logging. If left blank, logging occurs (via the standard Linux syslog facility) to
/var/log/messages.
Log level: The drop-down menu controls the level of detail present in log
messages, whether to syslog or to a dedicated log file. Not all of the standard
syslog logging levels are available. The menu offers a choice (in order of
decreasing detail) of:
•
Debugging information
•
Informational message
210
Issue E - February 2014