Guralp Systems CMG-DCM build <10,000 - Manual (Page 135)

Acquisition Modules and Platinum Firmware Receiving Data
10.3.1 Configurable parameters
The configurable parameters for Scream network clients have three tabbed
pages: General, Network and Servers:
10.3.1.1 General
User description: Sets the name of the service. This should be set to a
meaningful name for the data that it will be receiving, such as the IP or
hostname of the Scream server.
Enable: Causes this service to start automatically when the system is
re-booted. If this check-box is cleared, the service will need to be started
manually (from the “Control” → “Services” menu)
Delete: Causes the configuration for this instance to be removed from the
system when the form is submitted.
10.3.1.2 Network
Local address: If the acquisition module has multiple IP addresses, you can
optionally restrict the client so that incoming connections are only listened
for on one address. Leave blank to listen on all available interfaces.
Local service: Enter the UDP/TCP port number on which the server is to
listen for data requests. Port numbers can be mapped to names using the
standard Linux /etc/services file, which can be edited from the command line.
Leave blank to use the default scream port, 1567.
MAN-EAM-0003 135 Issue E - February 2014