Guralp Systems CMG-DCM build <10,000 User Manual
Page 171
Acquisition Modules and Platinum Firmware
Transmitting Data
Server hostname/IP address: Used to restrict the server to listen for incoming
connection requests only via particular network interfaces. If multiple
interfaces or addresses are configured for this system, entering the IP address
or associated hostname of one of them prevents connection attempts made to
all other addresses. If left blank, connection requests will be considered from
all interfaces.
Server port/service name: Must be populated with the service name or port
number on which it will listen for incoming connections. This must not be
used by any other service on this system.
Protocol
ACK/NAK timeout: Should be populated with an integer value which
specifies the number of milliseconds the server should wait for an
acknowledgement packet before transmitting the next block.
Mode: The drop-down menu controls the BRP transmission mode of the
server. At present, the only available choice is “Direct - simple transmission
with link error correction but no backfill”. Future implementations will offer
additional options.
Filter
The “Output filtering” section allows the operator to control which data are
transmitted, selecting by block type, sample rate or channel name.
171
Issue E - February 2014