Guralp Systems CMG-DCM build <10,000 - Manual (Page 194)

Acquisition Modules and Platinum Firmware Transmitting Data
Protocol: Select TCP or UDP - this must match the receiver's setting.
Push host: Enter IP addresses (or host names).
Service: Enter port numbers (or service names)
Clicking the button on any row will open a new row. In the same way,
rows can be deleted by clicking the corresponding button.
If the form is submitted when the table is full, extra blank lines are appended.
12.4.1.4 Channels
The GSMS server need not send all data from all channels to its clients. It is
possible to select which channels are transmitted.
Select one of the three different naming modes:
• Automatic: all channels are transmitted and named automatically
• Semi-automatic: all channels are transmitted and names can be mapped
using a configuration table
• Manual: only channels named in the configuration table are transmitted.
MAN-EAM-0003 194 Issue E - February 2014