Guralp Systems CMG-DCM build <10,000 - Manual (Page 218)

Acquisition Modules and Platinum Firmware Monitoring Operations
14 Monitoring Operations
This chapter details how to monitor and control the acquisition module.
Some functionality is only available from the command line (when connected
via a serial cable or via SSH over the network - see section 3.2.5 on page 27 for
details on how to do this) and other features are only available via the web
interface. This chapter will describe both.
14.1 Diagnostics and the Summary screen
14.1.1 System Status
To view the overall system status click on the “Home” link in the breadcrumb
trail or the “System status” link in the main menu.
The top part of the status screen is a tabbed list of devices connected to the
acquisition module. Clicking on a tab will display a status report for that
device.
The system has predefined warning and error levels which are displayed as
coloured dots and are defined as:
• Green: Level is 70% or above – system OK
• Amber: Level is below 70% - system warning
• Red: Level is below 40% - system error/malfunction
• Grey: There is no status information.
MAN-EAM-0003 218 Issue E - February 2014