Guralp Systems CMG-DCM build <10,000 - Manual (Page 235)

Acquisition Modules and Platinum Firmware Monitoring Operations
failure. The “RAID array” item on the “Control” menu will only be displayed
on CMG-NAMs with RAID fitted. It displays a page which reports the status
of and allows simple control of the fitted RAID array. The status of swap
partitions are also reported on this page.
14.4 Tools Menu
14.4.1 CD1.1 log analyser
The CD1.1 log analyser is covered in a separate manual, the CD1.1 operations
guide, MAN-EAM-1100, which is available for download from
http://www.guralp.com/documents/MAN-EAM-1100.pdf
14.4.2 Environment logs
Platinum firmware has the facility to record environmental information such
as temperature and supply voltage. Samples are recorded every ten seconds.
The data can be subsequently downloaded or graphed. The parameters
available for monitoring vary between models.
To configure the environment logs from the web interface, select:
Configuration → All options → GPIO labels and power switch settings → Logging
The screen displays the environment logging options:
MAN-EAM-0003 235 Issue E - February 2014