Guralp Systems CMG-DCM build <10,000 - Manual (Page 286)

Acquisition Modules and Platinum Firmware Appendices
16.5.14 DM24S24EAM: Sensor Inputs
This is a standard 32-pin “mil-spec” plug,
conforming to MIL-DTL-26482 (formerly
MIL-C-26482). A typical part-number is
02E-16-32P although the initial “02E” varies with
manufacturer.
Suitable mating connectors have part-numbers like
***-16-32S and are available from Amphenol, ITT
Cannon and other manufacturers.
Pin Function Pin Function
A Channel 0 +ve T E/W calibration enable
B Channel 0 –ve U Centre
C Channel 1 +ve V not connected
D Channel 1 –ve W Unlock
E Channel 2 +ve X Lock
F Channel 2 –ve Y Logic signal ground
G Vertical mass position Z not connected
H not connected a not connected
J N/S mass position b Power 0 V
K Busy indicator LED c Power output +10 to +24VDC
L E/W mass position d Channel 3 +ve
M not connected e Channel 3 –ve
N Signal ground f Channel 4 +ve
P Calibration signal g Channel 4 –ve
R Vertical calibration enable h Channel 5 +ve
S N/S calibration enable j Channel 5 –ve
Wiring details for the compatible socket,
***-16-32S, as seen from the cable end
(i.e. during assembly).
MAN-EAM-0003 286 Issue E - February 2014