Guralp Systems CMG-DCM build <10,000 User Manual
Page 173

Acquisition Modules and Platinum Firmware
Transmitting Data
If the form is submitted when the table is full, extra blank lines are appended.
12.1.3.2 Configurable parameters in expert mode
The following additional configuration parameters are available by clicking
the
button at the bottom of the form and selecting the 'Advanced' tab.
Log file: It may sometimes be desirable, for debugging purposes, to separate
log messages for this transmitter from the standard system log. The text field
can be populated with a path name which will then be used for dedicated
logging. If left blank, logging occurs (via the standard Linux syslog facility) to
/var/log/messages.
Log level: The drop-down menu controls the level of detail present in log
messages, whether to syslog or to a dedicated log file. Not all of the standard
syslog logging levels are available. The menu offers a choice (in order of
decreasing detail) of:
•
Debugging information
•
Informational messages
•
Important notices
•
Warnings
Audit log size: The GCF BRP sender keeps its own audit log, independent
from the system log. The contents of this log are available using the “GCF
Audit Log viewer” facility as described in section 14.4.5 on page 241. The
amount of data retained is controlled by the drop-down menu, where the
choices are:
•
64Kib (small)
•
256Kib (medium)
•
2MiB (large)
•
16MiB (huge)
173
Issue E - February 2014