Guralp Systems CMG-DCM build <10,000 User Manual
Page 29
Acquisition Modules and Platinum Firmware
Initial set-up
Enter the IP address of the acquisition module into the Host Name (or IP
address) field, check that SSH is selected as the Connection type and then
click the
button.
The first time you use SSH to connect to a host, you will be asked to verify the
“host key”:
This is normal (simply click
to dismiss the dialogue) but, if you are
ever asked this again, it means that either the host key of the acquisition
module has changed – perhaps because of a firmware upgrade – or there is a
network address conflict or, worse, a security problem on your network.
You will now be prompted for a login name: the default is root. Type this at
the prompt and press the ENTER key. You will next be prompted for a
29
Issue E - February 2014