Guralp Systems CMG-DCM build <10,000 - Manual (Page 262)

Acquisition Modules and Platinum Firmware Appendices
16.2 Appendix B - Using third-party terminal emulators
There are a number of terminal emulator programs that you can use to access
the serial ports of the digitiser and the optional networking interface. The
terminal emulator built into Scream is recommended but, if this is not
available, there are a variety of alternatives. Three of these are detailed below.
16.2.1 Hyperterminal, as provided with Windows XP.
1. Click on Start and then Run.
2. Enter 'hypertrm' and click on .
3. The program will ask you for a name for the connection:
Enter any suitable name, then click .
MAN-EAM-0003 262 Issue E - February 2014