Comtech EF Data SDM-2020 - Manual (Page 88)

SDM-2020 Satellite Modulator Revision 7
Front Panel Operation MN/SDM2020M.IOM
5-46
5.6.8.8.1 Master Reset Function
MASTER RESET
HARD/SOFT
CAUTION
When a hard reset is initiated, the modulator hardware is reset, and all
default configuration settings will be installed. When a soft reset is
initialized, the modulator hardware will be reset, but the initial firmware
configuration settings will be saved.
1 Press once to access SOFT.
2 Press [ ↑] or [↓] to alternate between HARD and SOFT until the desired type is visible.
3 Press . If SOFT has been selected,
4 Press again to reset the modulator. If HARD is selected, press [ →] until the cursor
is on YES.
5 Press .
5.6.8.8.2 Alarm Relay Function
ALARM RELAY
NORMAL
This window displays the Alarm Relay selections of NORMAL or INVERT.