Comtech EF Data SDM-2020 - Manual (Page 190)

SDM-2020 Satellite Modulator Revision 7
Remote Control Operation MN/SDM2020M.IOM
A-20
A.5.1 B
ULK
C
ONSOLIDATED
S
TATUS
Parameter
Type
Command/Status/
Response
Description of Arguments Comments
Bulk
Consol.
Status Command:
Response:
>add/BCS_p1,p2,p3, . . . pn'cr''lf']
This command causes bulk mod status to
be returned. To reduce the length of the
response, message parameter data are
returned without identifiers. However,
parameter identification can be determined
by order of return. Each status parameter is
terminated with a ',' (comma) except for the
last parameter which has the standard
message termination sequence ('cr''lf']).
Most of the data returned is formatted the
same way as the single command status
request (refer to the appropriate portions of
this document in preceding sections).
Additional configuration status of new
options and features will always be
appended to the end.