Comtech EF Data SDM-2020 User Manual
Page 169
SDM-2020 Satellite Modulator
Revision 7
FAST Options
MN/SDM2020M.IOM
14-3
Comtech EF Data Customer Support personnel will verify the order and provide an
invoice and instructions.
Enter access codes as follows:
Press [CLEAR] to return to the Main menu.
Use
[
←] and [→] to select Function Select:Utility menu.
Press
[ENTER].
Use
[
←] and [→] to select Utility:MOD Options menu.
Press
[ENTER].
Use
[
←] and [→] to select Configuration Code-MOD menu
Press
[ENTER].
Menu appears as follows:
AAAAAAAAAA
AAAAAAAAAA
Enter the access code. Observe the following:
1. To enter the code, press [ENTER] and use the [
↑ ] [↓ ] keys to select an
alpha numeric character.
2. Use
[
→ ] to move to the next character or to move to the next line.
3. Repeat the procedure until all the required characters of the code have been
entered.
4. After completing entry of the code, press [ENTER]. The unit should display
Modem Initialization and will reboot to the factory default settings with
the new option available.
5.
If a wrong or invalid code is entered, the unit will display Wrong Code
Entered! and no changes will occur. Retry the code, verify that the code is
correct, or request assistance from Comtech EF Data Customer Support
department
.