Comtech EF Data SDM-2020 - Manual (Page 139)

SDM-2020 Satellite Modulator Revision 7
Data Interfaces MN/SDM2020M.IOM
11-4
11.1.2 A
PPLICABLE
D
OCUMENTS
Refer to Table 11-1 for applicable documents:
Table 11-1. G.703 Applicable Documents
Document # Document Title
ITU-T G.703 Physical/Electrical Characteristics of Hierarchical Digital Interfaces.
ITU-T G.704 Synchronous Frame Structures Used at Primary and Secondary Hierarchical Levels.
ITU-T G.742 General Considerations on Second Order Multiplex Equipment.
ITU-T G.743 Second Order Digital Multiplex Equipment Operating at 6312 kbit/s and using
Positive Justification.
ITU-T G.745 Second Order Digital Multiplex Equipment Operating at 8448 kbit/s and using
Positive/Zero/Negative Justification.
ITU-T G.747 Second Order Digital Multiplex Equipment Operating at 6312 kbit/s and
Multiplexing three Tributaries at 2048 kbit/s.
ITU-T G.751 Digital Multiplex Equipment Operating at the Third Order Bit Rate of 34,368 kbit/s
and the Fourth Order Bit Rate of 139,264 kbit/s and using Positive Justification.
ITU-T G.752 Characteristics of Digital Multiplex Equipment Based on a Second Order Bit Rate
of 6312 kbit/s and using Positive Justification.
ITU-T G.753 Third Order Digital Multiplex Equipment Operating at 34,368 kbit/s and using
Positive/Zero/Negative Justification.
ITU-T G.823 The Control of Jitter and Wander within Digital Networks which are Based on the
2048 kbit/s Hierarchy.
ITU-T G.824 The Control of Jitter and Wander within Digital Networks which are Based on the
1544 kbit/s Hierarchy.
Bellcore SONET STS-1.
SP/6065 Comtech EF Data Specification, Video Modem Framing Modes and Interface.