beautypg.com

Comtech EF Data SLM-5650A User Manual

Page 76

background image

SLM-5650A Satellite Modem

Revision 8

Updating Firmware

MN-SLM5650A

4–8

Step Task

11

(cont)

Upon successful completion of transfer, the progress bar reads 100%, and the Image Upgrade Complete message

displays:

Click [OK] to exit the Image Upgrade page and return to the Admin | Upgrade page.

12

Refresh the Admin | Upgrade page and verify that the newly-uploaded firmware is reported in the proper

Network Processor Firmware Info Image slot.

If not, open the Admin | Reboot page then, in the Network Processor Boot From section, use the drop-down

menu to select Newest as needed to force the NP Module to boot using the firmware with the most recent build

date. Click [Submit] when done.

13

Save all settings before rebooting to prevent loss of configuration settings. Go to the

Save Configuration page, then click [Save Now]: