Comtech EF Data SLM-5650A - Manual (Page 56)

SLM-5650A Satellite Modem Revision 8
Installation MN-SLM5650A
2–6
2.2.2 Installing the Optional Bearingless Rack Slide Set
The optional FP/SL0006 Bearingless Rack Slide Set may be installed into the equipment rack
cabinet and onto the sides of the SLM-5650A as shown in Figure 2-4 and per the following
procedure:
Step Task
1 Use the provided hardware to install one slide onto each side of the SLM-5650A chassis.
2
Use the provided hardware to install the slide rail components into each interior side of the
equipment rack cabinet.
3
Install the unit into the front of the equipment rack. Ensure that the slides properly engage
the cabinet-mounted slide rails.
4
Continue to slide the modem into the equipment rack to its final operating position. Then,
use four user-provided screws to secure the modem to the equipment rack’s right and left
threaded front rails (through the front panel slots).
CEFD Part Number Description
FP/SL0006 Bearingless Rack Slide Set – 26”
Figure 2-4. Optional Bearingless Rack Slide Set Installation