Comtech EF Data SLM-5650A - Manual (Page 180)

SLM-5650A Satellite Modem Revision 8
Network Processor (NP) Interface MN-SLM5650A
8–18
Item Description
Current Running
(read only) – displays current NP Interface Firmware Image as defined on the
Admin | Reboot page (e.g., Image1 or Image2).
Upgrade To
(read only) – displays the NP Interface Firmware Image that will be overwritten
with the new image as defined on the Admin | Reboot page (e.g., Image1 or
Image2).
Upgrade Image File
Click [Browse] to locate the bulk image on the local computer’s file system, and
then click [Upload] to upload the image.
8.6.6.2.6 Admin | Defaults
Use this page to restore all previously-configured modem parameters – with the exception of the
Admin User Name and the Admin Password (see Chapter Sect. 8.6.6.2.3) – to their Factory
Default Configuration settings.
Figure 8-11. Admin | Defaults (Factory Default Configurations) page
Click [Restore Now] to begin the restoration process.
At the user prompt (shown at right), click OK to
execute the process, or Cancel to abort the command.