Comtech EF Data SLM-5650A - Manual (Page 249)

SLM-5650A Satellite Modem Revision 8
NP Interface Telnet/SSH CLI Operation MN-SLM5650A
9–31
9.2.13 Operations & Maintenance page (O)
The Operations & Maintenance page, opened from the Main Menu, contains the following
options or fields:
Menu Options/Fields Entry Description
Statistics T
Provides user with read-only access to Ethernet Tx/Rx, LAN, WAN
operating statistics; allows user to clear existing statistics.
Ping/TraceRoute Target IP I
Allows user to edit target IP address for ping and trace route using
the  arrow keys.
Ping Above Address P Allows user to ping on IP Address.
Max Trace Route Hops M Allows user to set the maximum number of trace route hops using
the  arrow keys.
Trace Route Above Address R Allows user to trace route on IP address.
Base Management Port B Allows user to edit the Vipersat base management UDP/TCP port
using the  arrow keys.
WAN to WAN Internal Mcast Addr W Allows user to edit the WAN-WAN Internal Multicast Address using
the  arrow keys.
Debug Menu D Password-restricted for factory use only.
Note: Ping and Trace Route are only available through the CLI Operations & Maintenance page.
For ping and trace route to work, the user must enter a target IP address. The user can then choose
to issue a Ping or Trace Route to the Target IP Address. When doing a Trace Route, the
maximum trace route hops can also be specified.