Comtech EF Data SLM-5650A - Manual (Page 223)

SLM-5650A Satellite Modem Revision 8
NP Interface Telnet/SSH CLI Operation MN-SLM5650A
9–5
9.2.3 Main Menu
The Main Menu serves as the CLI’s primary navigation page. All selections made on this page
take the user to submenus listed in this table (operation features nested under each of these
submenus, in turn, are described in the chapter sections listed):
Submenu Entry Function/Description See…
Administration A
The Administration Menu provides a basic set of
standard admin functions to the NP Interface.
Sect. 9.2.4 (9.2.4.1
through 9.2.4.8)
Satellite Modem
Configuration
M
The Satellite Modem Configuration option displays
nested menus that allow the user to configure and
monitor the satellite base modem.
Sect. 9.2.5 (9.2.5.1
through 9.2.5.6)
LAN N
The LAN menu allows the user to change the IP
address and view the ARP (Address Resolution
Protocol) table.
Sect. 9.2.6 (9.2.6.1
through 9.2.6.3)
WAN W
The WAN menu allows the user to configure QoS
(Quality of Service) and DiffServ (Differentiated
Services).
Sect. 9.2.7
Route Table R
The Route Table menu allows the user to configure the
Unicast/Multicast routing tables.
Sect. 9.2.8
OSPF F
The OSPF Menu allows the user to configure Open
Shortest Path First routing parameters.
Sect. 9.2.9
IGMP I
The IGMP Menu allows the user to configure Internet
Group Management Protocol parameters
Sect. 9.2.10
Vipersat Configuration V
The FAST-Feature-enabled Vipersat Configuration
menu allows the user to configure Vipersat
functionality. This menu selection is visible/available
only after the Vipersat option has been purchased.
Sect. 9.2.11
Redundancy
Configuration
E
The Redundancy Configuration Menu allows the user
to view the 1:1 IP redundancy status.
Sect. 9.2.12
Operations and
Maintenance
O
The Operations & Maintenance menu allows the user
to configure various options used to control and
maintain the system. This menu also provides
diagnostic tools for troubleshooting and statistics.
Sect. 9.2.13,
9.2.13.1