Comtech EF Data SLM-5650A - Manual (Page 390)

SLM-5650A Satellite Modem Revision 8
Appendix C MN-SLM5650A
C–38
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Receive T1
Framing
T1F= 1 byte, value of
0 or 1
Command or Query.
Receive T1 Framing, where:
0=None
1=G.704
Note: Commands as well as queries are not allowed when either the GigaBit
Ethernet or NP card has been selected as the current interface type.
Example: T1F=0
T1F=
T1F?
T1F*
T1F#
T1F? T1F=x
(see Description
of Arguments)
Receive T2
Framing
T2F= 1 byte, value of
0, 1, 3, or 5
Command or Query.
Receive T2 Framing, where:
0=None
1=G.704
3=G.743
5=G.747
Note: Commands as well as queries are not allowed when either the GigaBit
Ethernet or NP card has been selected as the current interface type.
Example: T2F=0
T2F=
T2F?
T2F*
T2F#
T2F? T2F=x
(see Description
of Arguments)
Tx Ternary
Code
TTC= 1 byte, value of
0 thru 3
Command or Query.
Tx Ternary Code, where:
0=AMI
1=B8ZS
2=B6ZS
3=HDB3
Example: TTC=3 (Set Tx Ternary Code to HDB3)
TTC=
TTC?
TTC*
TTC#
TTC? TTC=x
(see Description
of Arguments)