Comtech EF Data SLM-5650A - Manual (Page 112)

SLM-5650A Satellite Modem Revision 8
Front Panel Operation MN-SLM5650A
5–30
CONFIG: IP  EthernetConfig  SNMP  Communities
SNMP Communities: Read Write
(E)
Use the arrow keys to select Read or Write, and then press [ENT].
CONFIG: IP  EthernetConfig  SNMP  Communities  Read
SNMP Read Community:
public (E)
To edit the SNMP Read Community string, first use the

arrow keys to select the character
to edit, and then use the arrow keys to edit that character.
Note: Only the first 20 characters on the bottom line are available.
All printable ASCII characters are available with the exception of the backslash ‘/’ (ASCII
code 92) and tilde ‘~’ (ASCII code 126).
Once the string has been composed, press [ENT]. All trailing spaces are removed from the
Read Community string upon entry.
CONFIG: IP  EthernetConfig  SNMP  Communities  Write
SNMP Write Community:
private (E)
To edit the SNMP Write Community string, first use the

arrow keys to select the
character to edit, and then use the arrow keys to edit that character.
Note: Only the first 20 characters on the bottom line are available.
All printable ASCII characters are available with the exception of the backslash ‘/’ (ASCII
code 92) and tilde ‘~’ (ASCII code 126).
Once the string has been composed, press [ENT]. All trailing spaces are removed from the
Write Community string upon entry.
CONFIG: IP  EthernetConfig  SNMP  Traps
SNMP Traps: Address #1 Address#2
Community Version (E)
Use the arrow keys to select Address #1, Address #2, Community, or Version, and then
press [ENT].