Comtech EF Data SLM-5650A - Manual (Page 379)

SLM-5650A Satellite Modem Revision 8
Appendix C MN-SLM5650A
C–27
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
BERT Pattern PAT= 1 byte, value of 0
thru 8
Command or Query.
BERT Pattern, where:
0=2047
1=Mark
2=Space
3=1:1
4=1:2
5=2^15-1
6=2^20-1
7=2^23-1
8=MIL-188
Example: PAT=0 (2047 Pattern)
PAT=
PAT?
PAT*
PAT#
PAT? PAT=x
(see Description
of Arguments)
Retrieve next 5
unread Stored
Events
N/A 110 bytes Query only.
Unit returns the oldest 5 Stored Events which have not yet been read over the
remote control.
Reply format: {CR}Sub-body{CR}Sub-body{CR}Sub-body{CR}Sub-body{CR}Sub-
body, where Sub-body= Axxxxxxxxddmmyyhhmmss, A being the fault type where:
1=Unit
2=Rx Traffic
3=Tx Traffic
4=Info
xxxxxxxx is the Fault Code number, as in LUF?, TXF?, RXF?, or Info Code,
which is:
00000000=Power Off
00000001=Power On
00000002=Log Cleared
00000004=Global Config Change
00000005=NP Card Watch Dog Timer
00000006=NP Card Boot Timeout
00000007=Transec Card Boot Timeout
If there are less than 5 events to be retrieved, the remaining positions are padded
with zeros.
If there are no new events, the response is RNE*.
N/A RNE? RNE={CR}Axxxxx
xxxddmmyyhhmm
ss{CR}Axxxxxxxx
ddmmyyhhmmss{
CR}Axxxxxxxxdd
mmyyhhmmss{CR
}Axxxxxxxxddmm
yyhhmmss{CR}Ax
xxxxxxxddmmyyh
hmmss
(see Description
of Arguments)