Comtech EF Data SLM-5650A - Manual (Page 228)

SLM-5650A Satellite Modem Revision 8
NP Interface Telnet/SSH CLI Operation MN-SLM5650A
9–10
9.2.4.4 Administration Menu | SNMP page (P)
The SNMP page, opened from the Administration Menu, allows the user to change the parameters
associated with Simple Network Management Protocol, an application-layer protocol designed to
facilitate the exchange of management information between network devices.
The SLM-5650A SNMP agent supports SNMPv1, v2c and, when the IP Interface Security Level
has been set to High, SNMPv3. The page contains the following options or fields:
Menu Options/Fields Entry Description
Read Community [RO]
For complete details on SNMP and using this menu, refer to Chapter
6.4 SNMP Interface.
Write Community [RO]
Trap Community T
Trap I
System Contact C
System Location N
Once all changes have been made using this menu, in order for the configuration to take effect,
the user must press ‘S’ to save these SNMP configuration changes, then reboot the modem using
the Reboot Now prompt (press ‘R’ using the Administration Menu) as outlined in this chapter in
Chapter Sect. 9.2.4.8.