Comtech EF Data SLM-5650A - Manual (Page 374)

SLM-5650A Satellite Modem Revision 8
Appendix C MN-SLM5650A
C–22
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Configured
FAST Options
N/A 16 bytes Command or Query.
Unit returns information concerning the Configured FAST Options, and the option
field, in the form abcdefghxxxxxxxx, where:
a = QOS: 0 = Not Installed, 1 = Installed
b = Reserved
c = Spectrum Spreading
d = Management Security: 0 = Not Installed, 1 = Installed
e = Vipersat Compatibility: 0 = Not Installed, 1 = Installed
f = Reserved
g = Transec Data Rate Option: 0 = Base (5,000 kbps),
1 = 10,000 kbps, 2 = 20,000 kbps, 3 = 51,840 kbps,
4 = 155,520 kbps, 5 = 2,500 kbps
h = Vipersat Data Rate Option: 0 = Base (5,000 kbps),
1 = 10,000 kbps, 2 = 20,000 kbps, 3 = 51,840 kbps,
4 = 155,520 kbps, 5 = 2,500 kbps
i = Bridged Point to Multipoint: 0 = Not Installed, 1 = Installed
j = Customer Defined Options: 0-3
x = spare
N/A CFO? CFO=abcdefghijxx
xxxx
(see Description
of Arguments)
Circuit ID String CID= 24 bytes Command or Query.
Sets or queries the user-defined Circuit ID string, which is a fixed length of 24
characters.
Valid characters include: Space ( ) * + – , . / 0 9 and A thru Z
CID=
CID?
CID*
CID#
CID? CID=x
(see Description
of Arguments)
Carrier-in-
Carrier (CnC)
Mode
CNM= 1 byte, value of 0
or 1
Command or Query.
CnC Mode of Operation, where:
0= Off
1= On
Example: CNM=0
CNM=
CNM?
CNM*
CNM#
CNM? CNM=x
(see Description
of Arguments)
Carrier Only
Test Modes
COM= 1 byte, value of 0
thru 2
Command or Query.
Test Mode, where:
0= Normal Mode (no test)
1=Tx CW
2=Tx Alternating 1,0 Pattern
Example: COM=1 (CW Mode)
COM=
COM?
COM*
COM#
COM? COM=x
(see Description
of Arguments)
Carrier-in-
Carrier (CnC)
Re-Acquisition
Time
CRA= 3 bytes Command or Query.
CnC re-Acquisition time in seconds, from 10 to 999. This is the time wherein CnC
will start searching for the delay and frequency offset if a long duration of unlock
occurs.
Example: CRA=010
CRA=
CRA?
CRA*
CRA#
CRA? CRA=xxx
(see Description
of Arguments)