Comtech EF Data SLM-5650A - Manual (Page 206)

SLM-5650A Satellite Modem Revision 8
Network Processor (NP) Interface MN-SLM5650A
8–44
Selection Description / Setting
Robustness
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a
subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is
robust to (Robustness Variable-1) packet losses.
Enter a value from 2 to 10 (the default value is 2). Note that the Robustness Variable
MUST NOT be 0, and SHOULD NOT be 1.
Version Version – Enter 1 for IGMPv1 or 2 for IGMPv2.
Click [Submit] to save the desired IGMP configuration changes on this page.
8.6.6.7 Stats (Statistics) pages
Select the Ethernet Tx, Ethernet Rx, IP, WAN, or Clear All hyperlink to continue.
8.6.6.7.1 Stats | Ethernet Tx
Figure 8-29. Stats | Ethernet Tx Statistics page
Clear/Refresh Ethernet Tx Stats
Click [Clear] to delete all Ethernet Tx statistics (this will also clear all Ethernet Rx statistics).
Click [Refresh] to update the page with the most recent statistics.