Comtech EF Data SLM-5650A - Manual (Page 394)

SLM-5650A Satellite Modem Revision 8
Appendix C MN-SLM5650A
C–42
C.6.10 TRANSEC Interface Commands / Queries
The instruction codes that follow are valid only when the optional TRANSEC Interface Module is installed in the SLM-5650A Satellite Modem.
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Transec
Ethernet
Interface
Gateway IP
Address
SMG= 15 bytes Command or Query.
Used to set the Gateway IP address for the Transec Management port in the form
aaa.bbb.ccc.ddd, where:
aaa.bbb.ccc.ddd = IP address
Example: 010.006.030.001
N/A SMG? SMG=aaa.bbb.cc
c.ddd
(see Description
of Arguments)
Transec
Ethernet
Interface
Management IP
Address and
Range
SMI= 18 bytes Command or Query.
Used to set the IP address and network prefix for the Transec Management port in
the form aaa.bbb.ccc.ddd.ee, where:
aaa.bbb.ccc.ddd = IP address, and
ee = network prefix (0-31)
Example: 010.006.030.001.24
N/A SMI? SMI=aaa.bbb.ccc
.ddd.ee
(see Description
of Arguments)