Comtech EF Data SLM-5650A - Manual (Page 102)

SLM-5650A Satellite Modem Revision 8
Front Panel Operation MN-SLM5650A
5–20
CONFIG: Rx  CnC  Acquisition
CnC Acquisition: Range: 60.000 KHz
Reacq: 120 Sec (E)
First, use the arrow keys to select Range or Reacq, and then press [ENT]. Then, use Method
1 or Method 2 to configure these options:
Method Procedure
1 Key in the desired value using the numbered keypad. Press [ENT] when done
2
Select the digit to be edited using the  arrow keys, and then change the value of that digit by
using the  arrow keys. Press [ENT] when done.
Note the following:
Option Settings
Range CnC Interfering Carrier Frequency Offset Search Range: 0 – 60 kHz (in 1 Hz steps).
Reacq Holdoff time before the demodulator starts a new search.
CONFIG: Rx  CnC  SearchDelay
CnC Search Delay: Min: 000 mSec
Max: 290 mSec (E)
First, use the arrow keys to select Min or Max, and then press [ENT]. Then, use Method 1 or
Method 2 to configure these options:
Method Procedure
1 Key in the desired value using the numbered keypad. Press [ENT] when done
2 Select the digit to be edited using the  arrow keys, and then change the value of that digit by
using the  arrow keys. Press [ENT] when done.
Note the following:
Option Settings
Min Minimum Delay value to use when searching for the Interfering Carrier.
Max Maximum Delay value to use when searching for the Interfering Carrier.