Comtech EF Data SLM-5650A - Manual (Page 267)

SLM-5650A Satellite Modem Revision 8
TRANSEC Module SSH CLI Operation MN-SLM5650A
11–3
11.2 Command Line Interface (CLI) Pages
11.2.1 CLI Menu System – Parallel Functionality
The CLI, accessible via SSH, allows the user to change operating parameters in a manner similar
to the functionality, as provided, for the monitoring, configuration, and control via the
SLM-5650A Satellite Modem’s front panel menus (see Chapter 5. FRONT PANEL
OPERATION) and the TRANSEC Module HTTPS Interface (see Chapter 10. TRANSEC
MODULE HTTPS INTERFACE).
11.2.2 CLI Menu – Common Information, Navigation, Operation Features
Note the following:
1. With some exceptions, the menu pages depicted in this chapter feature the following
information or navigational aids:
Menu Options/Fields Entry Description
[Text field example] [RO]
Typically found in the body of the page. This designates the
field as a read-only status/informational message. There is no
user action required for this item.
Logout of Administration
Session
L
Found at the bottom of the page. Allows user to log out of the
SSH session.
Exit Menu X
Found at the bottom of the page. Allows user to exit the current
menu and return to the parent menu. Alternately, the user may
press the Esc key to perform the same action.
2. Typically, once any mnemonic is entered, the user is
prompted to type in a functional selection, an
alphanumeric configuration string, or an operational
value. This prompt is provided at the bottom of the active
page and takes the form of a selection choice and/or a
blank prompt (a solid bar), as shown in the example to
the right:
3. If a parameter is rejected for any reason, an error will appear at the top of the page, along
with an explanation that serves to assist the user in the re-entry of information, as per the
following examples: